Gutter cleaning and fault inspection
The inspection identifies access constraints, hidden defects and the information a tradesperson needs to price the work without avoidable provisional allowances.
Roofer service guide
Stop overflowing gutters and damp elevations with correctly sized channels, falls, outlets and downpipes matched to the roof area.
Typical project budget
£300–£2,000
Use this as a planning range only. Your property, region, specification and access determine the final quotation.
The inspection identifies access constraints, hidden defects and the information a tradesperson needs to price the work without avoidable provisional allowances.
This covers the measured installation, compatible materials and the adjustments needed to leave the finished work safe, secure and ready to use.
The quote should state the preparation, protection, disposal and making-good included, not just the visible repair itself.
Testing is documented at handover so you know what was checked, what standards apply and which certificates or maintenance notes you should retain.
Ask the tradesperson to define this allowance, its exclusions and the evidence they will provide at handover so every quote can be compared fairly.
Ask the tradesperson to define this allowance, its exclusions and the evidence they will provide at handover so every quote can be compared fairly.
Ask what the inspection covers, which hidden conditions could change the price and how any additional work must be approved.
Confirm who pays for access equipment, parking restrictions, protection and any return visit caused by difficult or limited access.
Blocked outlets, incorrect falls, undersized runs and damaged fascias can all cause overflow; the whole route should be checked.
Only if the fascia is sound enough to hold brackets; replacement may be safer if it is rotten or loose.
Never assume. Request a measured schedule covering outlets, downpipes, shoes, clips and disposal.